Note: To execute a command, only the unique prefix of the command needs to be entered. For instance, the letter v can be entered to execute the version command, since it is the only command which begins with a v. In contrast, the letters ad are needed to execute the advanced command, since there are two other commands that begin with a, agent and async.
When a command requires the option enable or disable, only a unique prefix is required, for instance, e or d.
| Command | Description |
|---|---|
| advanced | Start default application |
| agent [enable|disable] | Show/set SNMP agent enable |
| apps | Show name and version of installed applications |
| async [enable|disable] | Show/set async port enable |
| auto [enable|disable] | Show/set auto configuration enable |
| cfg [clear|factory] | Show/clear static configuration |
| community [<community>|clear] | Show/set SNMP community |
| contact [<contact>|clear] | Show/set SNMP contact |
| default [<application>] | Show/set default application name |
| dhcp [enable|disable] | Show/set DHCP enable |
| dns [<dns server>] | Show/set DNS server address |
| domain [<domain name>|clear] | Show/set DNS domain name |
| environment [<environment>|clear] | Show/set application environment |
| exit | Exit RedBoot telnet session and reset |
| facility [<facility>] | Show/set syslog facility |
| features [<features>] | Show/set licensed features |
| ftp [<ftp server>] | Show/set FTP server address |
| help [-v][<command>] | Display help for RedBoot commands |
| heartbeat [enable|disable] | Show/set heartbeat enable |
| host [<host name>] | Show/set host name |
| http [<http server>] | Show/set HTTP server address |
| idle [<30-3600 seconds>] | Show/set telnet idle timeout |
| ip [<address> [<mask> [<gateway>]]] | Show/set IP address configuration |
| laygocfg [list] | [load [-h <host>][<image>]] | List/load LayGO configuration files |
| license [<license>|clear] | Show/set PXS software license |
| location [<location>|clear] | Show/set SNMP location |
| log [<log server>] | Show/set Log server address |
| logging [enable|disable] | Show/set logging enable |
| mac | Show Ethernet MAC address |
| model | Show model number |
| monitor [enable|disable] | Show/set monitor enable |
| ntp [<ntp server>] | Show/set NTP server address |
| options [<options>|clear] | Show/set application options |
| password [<password>|clear] | Set/clear password |
| ping <IP address> | Send ICMP echo requests |
| primary [enable|disable] | Show/set primary enable |
| reboot | Reboot the system to the default application |
| reliable [enable|disable] | Show/set reliable enable |
| reset | Reset the system |
| revision | Show hardware revision |
| script [<script>|clear] | Show/set configuration script |
| serial | Show PXS serial number |
| smtp [<smtp server>] | Show/set SMTP server address |
| snmp [<snmp server>] | Show/set SNMP server address |
| standby [<standby server>] | Show/set Standby server address |
| tag [<tag>|clear] | Show/set logging tag |
| telnet [disable|enable] | Show/set RedBoot telnet server enable |
| tftp [<tftp server>] | Show/set TFTP server address |
| timeout [<0 or 5-255 seconds>] | Show/set bootloader timeout |
| trap [enable|disable] | Show/set SNMP trap enable |
| update [enable|disable] | Show/set update configuration enable |
| utc [<offset>] | Show/set UTC offset |
| version | Display RedBoot version information |
| virtual [<virtual server>] | Show/set Virtual server address |
| web [enable|disable] | Show/set Web server enable |
Note: The commands listed below should be used only on the instruction of Advanced Relay Technical Support. Improper use of these commands may render the PXS inoperable.
| Command | Description |
|---|---|
| control [enable|disable] | Show/set PXS control enable |
| debug [enable|disable] | Show/set debug port enable |
| disable | Disable default application loading |
| dump [-l <length>] -b <location> | Hex dump a range of memory |
| file [<start address>] | Show/set file system start |
| fis <command> (see table below) | Manage images in FLASH |
| gdb [enable|disable] | Show/set GDB enable |
| go [-w <timeout>][entry] | Execute code at a location |
| load [-r][-v][-h <host>][-m <tftp|xmodem|ymodem>][-b <base address>] <file name> | Load a file into RAM The -r option loads a raw binary image The -v option shows progress while loading |
| read [-w] <location> | Read a memory location |
| write [-w] <location> <value> | Write a memory location |
| run <image> | Run an image from FLASH |
Note: The commands listed below should be used only on the instruction of Advanced Relay Technical Support. Improper use of these commands may render the PXS inoperable.
| Command | Description |
|---|---|
| fis create [-b <base>][-l <image length>][-s <data length>][-f <flash address>][-e <entry>][-r <ram address>][-n] <name> | Creates an image in FLASH from data in RAM |
| fis delete <name> | Removes an image from FLASH |
| fis erase -f <flash address> -l <length> | Erases an area of FLASH |
| fis free | Shows which areas of FLASH are not in use |
| fis help | Displays help for FIS commands |
| fis init [-f] | Initializes FLASH |
| fis list [-c] | List images in FLASH and information about them The -c option displays image checksum instead of memory address |
| fis load [-b <base>][-c] <name> | Loads an image from FLASH to RAM The -c option displays the image checksum |